Configuring Basic Setting in Connecting Personal Computer to Switch Hub

Abstract

The importance of our research is to properly connect the ports and arrange the colors of the RJ45 and connect it to the switching hub to provide the computer with a network or Internet connection to access the hub. We need unity for working on this project to help each other. This hub provides data to the PCs, and the connection must be ensured to avoid data loss. This is a question that needs to be answered. This is the design of this project, how it works, and what are the project procedures for connecting switches to a personal computer (PC). Adjusting the RJ45 to correct the colors to be inserted into the RJ45 should be correct; when it cannot work because the colors are being configured incorrectly, check if there are mistakes or errors. You should always be alert. When your project fails, your project will not work. We must have a process in place for the project to work well. We should use AVR to maintain the voltage supply of the PC to 220 V. The results of our research showed that the network was well-configured to connect the PC to the switching hub because each result was carefully organized. Thus, there are things that must be completed by the hub and PC. For RJ45, all members must come up with this topic because it should be addressed by everyone. An ethernet hub, active hub, network hub, repeater hub, multiport repeater, or simple hub is a network hardware device that is used to connect multiple ethernet devices and make them act as a single network segment. The switching hub is always used in computer shops because it takes the Internet or network needed on PCs. PC configuration should be a step-by-step process for computers to operate and not to be misconfigured, and the ports should be in the right place.