TRANSBOTTLES: Eco - Furniture

Abstract

INTRODUCTION

The purpose of this research study is to examine the possibility of using plastic bottles and plastic wrappers as an eco-furniture. The effects of Polyethylene Terephthalate (PET) plastics in the durability of furniture were determined in study. The eco-bottles were formulated with variations of the factors for the most notable option.

METHODS

The eco-bottles were tested and the data was gathered and analyzed. Production process involves collecting, drying, packing, squishing, wrapping, molding, testing, and covering. The cutting of the plastic bits started first with the plastic wrappers. They cut them roughly to around 10 millimeters. After cutting, the plastic bits were directly put inside the bottle. Collect clean and dry plastic wrappers, compress wrappers into plastic 1.5 L bottle with a stick, pack tightly throughout the process to ensure that it is unsquishable, squish with one hand to measure if its full enough (squish<10% complete, make a 6 flower petals formation and secure eco-bottles with the use of masking tape). Cover the eco-bottles with plywood and cloth.

RESULTS

The eco-bottle was tested with a drop test, and the result was recorded. The eco-bottle furniture ratio and the weight differences were also recorded for reference. Subsequently, testing and data gathering, the results were compared and analyzed for conclusions. Based on research, they explained their opinion and comments about our product. They have different answers and explanation. In terms of physical aspect of the eco-furniture, there are positive and negative reactions. They said that the durability is well delivered, but the other colors of the cloth are not pleasant, and foam should be incorporated.

DISCUSSIONS

It can be concluded in the study that there is a change in weight and durability in the Eco-Bottles when the PET wrapper bits are put inside the container. It has become more durable and light-weight. The best possible amount of plastic wrapper bits to be used is approximately 10 cups of the total mass of the aggregate to be used. It is recommended to use correct ratio of the components in each bottles so that there will a balance in nature of the said project. Learners, parents, and stakeholders are suggested to practice the SAY-T or Segregate As You Throw in order to minimize the garbage in the school as well in the community.