Electrical Circuit Analyzer with Monitoring and Control System

Abstract

INTRODUCTION

Monitoring systems are evolving into market over the years. Technology has revolutionized our perspective of the world with this innovation. The previous frameworks of monitoring systems are limited due to its inefficiency and complicated design. Since, 21st century has advanced the risk of this technological advancement such as leaving electrical loads unattended increasing the risk of potential accidents. Commonly, leads to fire that occasionally endanger establishments and lives at all cost. For these reasons stated, the researchers used the concept of wireless monitoring and control system in order to create an innovative electric system device that will efficiently and effectively benefit the users.

METHODS

The researcher gathered the materials for the construction of the framework and the circuit. The framework was constructed through the pre-designing of the circuit diagram. The circuit was constructed by connecting the components and sensor in the Arduino microcontroller. The software used was created to run as Server in order to communicate with the client-hardware.

RESULTS

Electrical loads such as fans, bulbs, and other devices are tested and controlled wirelessly by GSM module and Bluetooth technology by sending command keys on the System Administrator that will control the client-hardware. The command is transmitted to the hardware that is being controlled. The system administrator replies as soon as the command has taken its effect. Then, checking the status of electrical loads will also be transmitted through SMS. It indicates the loads that are running and at the same time the time and date of the analysis that comes at the last part of the message. The use ofthe electric circuit analyzer with GSM-Based Monitoring and Control System is effective and efficient core tool in monitoring and controlling the electric system device.

DISCUSSIONS

The study varies on the reception of signal and the range of Bluetooth technology as the result demonstrated. to prevent electrical fluctuation, proper execution of wiring is necessarily needed. It is very much commendable to have a provision for operation without a main power supply such as solar panel and inverter. It is also a must to modify the program of the switch to make it functional.